The pneumatic fluid pump with 8 ATF adapters is used to efficiently drain and refill the ATF fluid of your vehicles. Easy operation only requires one person for the job. The vacuum pump is an extractor as well as a dispenser.
When the inner pressure reaches 43psi, turn the control valve to "dispense" and the fluid inside will be dispensed automatically. The gauge shows pressure inside the tank, when it reaches 43 psi (3 Bar), the exceed pressure will be released automatically. The quick released coupler allows you to disconnect the hose with one simple press.
The valve controls air inlet for stable extraction. Close the valve when you need to dispense fluid.
1 Pc - 6L Reservoir. 8 Pcs - Transportation adapters. 1 Pc - 1M nylon hose. 1 Pc - 2M PU hose.44 - Altis 2010, Mercedes Benz 722.9. 45 - VW CVT, Audi. 46 - VW DSG, Audi. Connect the hose with trigger and extraction hose to the reservoir. Connect the reservoir to 90 psi shop air. Turn the knob and the air inlet valve to extraction mode. Put the hose into the fluid you are to extract, lock the handle lever and press the hose trigger to start Extracting. Connect the correct adapter to your vehicle.
Connect the hose with trigger to the reservoir and the adapter. Turn the knob and the air inlet valve to dispense mode. Lock the handle lever and press the hose trigger to start transferring fluid to your transmission. Make sure the vehicle is at operating temperature when your are doing this job. Make sure you get enough pressure in the reservoir when you need to dispense fluid.
The item "EWK 6L ATF Automatic Transmission Fluid Pump Pneumatic Oil Suction Extractor" is in sale since Friday, June 24, 2016. This item is in the category "eBay Motors\Automotive Tools & Supplies\Air Tools\Other Automotive Air Tools". The seller is "ewktool_ny" and is located in Walton, Kentucky. This item can be shipped worldwide.