EWK 15L Pneumatic Manual Engine Oil Change Pump Vacuum Fluid Extractor Tank
LARGE CAPACITY - 15L in capacity, the oil extractor changes oil of 2 cars in a row. The fluid extractor holds up to 3.9 gal of fluid, you don't have to stop and empty the reservoir in the middle of oil evacuation. 2 WAY USAGE - Pneumatic and manual mode to fit any condition. Pneumatic mode provides higher speed while manual mode requires no other equipment to work with. SPEEDY EXTRACTION - Fast extraction speed of 1.6L /min. The oil change pump extracts engine oil in a 4 cylinder car within 5 minutes at pneumatic mode. NO OIL LEFT - Tubes with different diameter go into the bottom of oil pan. The fluid evacuator comes with 2 extension hoses to reach the very bottom of the reservoir and suck up every drop of oil. MULTIFUNCTIONAL - Brake bleeding hose makes your oil extractor multifunctional. Comes with an extra bleeding hose, the fluid extractor pump can also be used as a brake bleeder. If your engine has run for a while, turn it off to cool the oil down for at least 15 min. If the engine is cold, start it up and run it for a few minutes. Remove the oil dipstick and insert the connected tube into the dipstick pipe until it reaches the bottom of the oil pan. Connect the device to an air compressor and turn it on or start pumping manually. When extraction is finished, remove the tube and take the old fluid to your local oil disposal center. How To Install The Equipment Before Extraction. Connect the main tube counterclockwise with the oil extractor. Choose an extension tube with needed diameter.
Attach the blue adapter to the main tube. How To Pour Out The Oil After Extraction. Remove the hose clockwise and pour out the oil slowly in the recycling station.
Note that the fluid should not be over the limit line while pouring. Why Is The Extractor Leaking? There is a limit line on EWK oil extractor. If the fluid goes over the limit line, it might flow into the vacuum chamber and cause leaking. Why Couldn't The Extractor Stand On The Floor? One potential factor is that the high temperature liquid deforms the tank. If the fluid is higher than 200°F, it may cause malfunction of the product. To ensure your safety and top condition of the product, we suggest cooling your engine for 15 minutes before extraction. Cooling down the fluid before using the oil extractor brings the best performance!
Eagle mouth designed spout makes it fluent to pour and prevents spilling out. Ensures the tube and the spout are connected tightly before extraction. Made from Polypropylene which can withstand 200°F. With the sealing cap, you can transport the full unit to the local oil disposal center without spillage.
The item "EWK 15L Pneumatic Manual Engine Oil Change Pump Vacuum Fluid Extractor Tank" is in sale since Friday, June 28, 2019. This item is in the category "eBay Motors\Automotive Tools & Supplies\Air Tools\Other Automotive Air Tools". The seller is "ewktool" and is located in Hebron, Kentucky. This item can be shipped to United States.
- Item Includes: 15L Air Operated Oil Extractor Pump, 4 Pcs Tubes
- Modified Item: No
- Custom Bundle: No
- Manufacturer Part Number: EB0244
- Brand: EWK
- Non-Domestic Product: No
- Warranty: No